Journal of Space Science and Technology

Journal of Space Science and Technology

Study, Design and Simulation of a Widely Used Liquid Apogee Motor (LAM)

Document Type : Original Research Paper

Author
Iranian Space Research Center, Tehran, Iran
10.22034/jsst.2026.1608
Abstract
The increasing frequency of space launches carrying diverse payloads (e.g., for remote sensing, telecommunications) of varying masses underscores the critical need for high-energy, restartable propulsion systems to execute complex orbital maneuvers. A review of available data indicates that liquid propulsion engines, particularly liquid apogee motors, are essential for this role, as they provide the necessary thrust at orbital apogee or perigee for precise injection into target orbits.This research aims to identify the key specifications of such engines for missions in Low Earth Orbit and Geostationary Orbit. Through the analysis and extraction of existing data, the main parameters for a 400 Newton hypergolic bipropellant propulsion system were first determined. Using these parameters and the governing equations, the hydraulic circuit elements for a sample design were then modeled and simulated within the desired operational range.The simulation tool was validated against data from an experimental prototype, with results showing close alignment to design specifications. A specific impulse discrepancy of only 5% confirms the reliability of both the proposed design methodology and the developed simulator. In conclusion, by implementing automated data extraction from satellite and upper-stage databases, this work provides a validated tool for propulsion system design and dynamic simulation. It delivers propulsion system engineers with a comprehensive and trustworthy set of analytical and design tools.
Keywords
Subjects

Article Title Persian

مطالعه، طراحی و شبیه سازی یک موتور پیشران مایع نقطه اوج پرکاربرد

Author Persian

سیدعلیرضا جلالی چیمه
استادیار، پژوهشگاه فضایی ایران، تهران، ایران
Abstract Persian

تواتر فزاینده پرتاب‌های فضایی با محموله‌های متنوع (مانند سنجش از دور و مخابرات) با جرم‌های متفاوت، نیاز حیاتی به سامانه‌های پیشران پرانرژی و قابل استارت مجدد برای اجرای مانورهای مداری پیچیده را برجسته می‌سازد. مرور داده‌های موجود نشان می‌دهد که موتورهای پیشران مایع، به‌ویژه موتورهای مایع اوج‌گیر، برای این نقش ضروری هستند؛ چرا که توان ایجاد کشش لازم در نقطه اوج یا حضیض مداری برای تزریق دقیق به مدار هدف را فراهم می‌کنند. هدف این پژوهش، شناسایی مشخصات کلیدی چنین موتورهایی برای مأموریت‌ها در مدار زمین‌آهنگ و مدار پایینی زمین است. ابتدا با تحلیل و استخراج داده‌های موجود، پارامترهای اصلی یک سامانه پیشرانش دو مولفه‌ای با زوج مولفه خوداشتعال با تراست ۴۰۰ نیوتن به‌عنوان هدف تحقیق تعیین شد. سپس با استفاده از این پارامترها و معادلات حاکم، عناصر مدار هیدرولیکی یک نمونه طراحی و در محدوده عملیاتی مورد نظر مدل‌سازی و شبیه‌سازی گردید. ابزار شبیه‌سازی با استفاده از داده‌های یک نمونه آزمایشگاهی اعتبارسنجی شد که نتایج، هم‌خوانی نزدیکی با مشخصات طراحی نشان داد. اختلافی معادل ۵ درصد در پارامتر ایمپالس ویژه، قابلیت اطمینان هر دو الگوریتم طراحی پیشنهادی و شبیه‌ساز توسعه‌یافته را تأیید می‌کند. با پیاده‌سازی استخراج خودکار داده از پایگاه‌های اطلاعاتی مرتبط با ماهواره‌ها و طراحی و شبیه‌سازی انجام شده، دستاورد این کار ایجاد یک ابزار معتبر برای طراحی سامانه پیشران و شبیه‌سازی دینامیکی یک تراستر فضایی دو مولفه پیشران مایع را فراهم می‌آورد. این دستاورد مجموعه‌ای جامع و قابل اطمینان از ابزارهای تحلیلی و طراحی مورد نیاز مهندسان سامانه‌های پیشران را ارائه می‌دهد.

Keywords Persian

تراستر پیشران مایع
مدار زمین آهنگ
دو مولفه ای
فشار کاهشی
طراحی سیستمی
[1]    R. W. Humble, G. N. Henry, and W. J. Larson, Space Propulsion Analysis and Design, 1 st ed. New York: McGraw-Hill, 2007.
[2]    J. R. Wertz, D. F. Everett, and J. J. Puschell, Space Mission Engineering: The New SMAD, vol. 28, 1 st ed. Microcosm Press, 2011.
[3]    The Aerospace Corporation, Corporate Chief Engineer’s Office, "2023 Small Satellite Propulsion Survey," Distribution A, The Aerospace Corporation, El Segundo, CA, Dec. 2023.
[4]    G. D. Krebs, "Gunter's Space Page." Retrieved December 09, 2025, https://space.skyrocket.de/index.html
[5]    T. M. Chiasson, "Modeling the characteristics of propulsion systems providing less than 10 N thrust," PhD. thesis, Department Aeronautics Astronautics, Massachusetts Institute of Technology, Cambridge, MA, USA, 2012.
[6]    M. Shafiey Dehaj, M. Naderi Tabrizi, and S. A. R. Jalali Chimeh, "Statistical analysis of mass-energy parameters of multi-stage and clustered liquid propellant engines," Journal of Technology in Aerospace Engineering, vol. 3, no. 3, pp. 9-14 , 2019.
[7]    G. P. Sutton and O. Biblarz, Rocket Propulsion Elements, 9th ed. John Wiley & Sons, New York, 2016.
[8]    H. C. Hearn, "Design and development of a large bipropellant blowdown propulsion system," Journal of Propulsion and Power, vol. 11, no. 5, pp. 986–991, 1995, https://doi.org/10.2514/3.23927.
[9]    M. Naderi Tabrizi, S. A. R. Jalali Chime, and H. Karimi, "Modeling and simulation of open cycle liquid propellant engines," Journal of Science and Engineering, vol. 1, no. 1, pp. 17-34, 2013.
[10] S. A. R. Jalali Chimeh, M. Naderi Tabrizi, and H. Karimi, "Developing a simulation software for open cycle liquid propellant engines," Journal of Space Science and Technology, vol. 4, no. 1-2, pp. 29–38, 2011.
[11] S. A. R. Jalali Chimeh, H. Karimi Mazareh Shahi, and Mohammad. Shafiey Dehaj, "Frequency analysis of launch vehicle oscillation absorbent configuration on performance of LPE." Journal of Aeronautics and Space Technologies, vol. 12, no. 1, pp. 109-120, 2019.
[12] S. A. R. Jalali Chimeh, M. Naderi Tabrizi, and H. Karimi, "Dynamic analysis of simultaneous usage of propellant utilization and flight’s apparent velocity regulation systems in liquid propellant system," Modares Mechanical Engineering. vol. 15, no. 9, pp 23-34, 2015.
[13] C. Nae, I. C. Andrei, G. L. Stroe, and G. Berbente, "Mathematical modeling and numerical simulations for performance prediction in case of a liquid propelled rocket engine," AIP Conference Proceedings 2293, 2020, Paper 320004, https://doi.org/10.1063/5.0031146.
[14] A. S. Min, A. Kuranaga, H. Okabayashi, Y. Yano, and A. Kakami, "Design and test of impingement type of N₂O/DME bipropellant thruster," *J. Japan Soc. Aeronaut. Space Sci.*, vol. 67, no. 4, pp. 140–147, 2019. doi: 10.2322/jjsass.67.140.
[15] A. Kuranaga, R. Sato, Y. Yano, and A. Kakami, "N₂O/DME bipropellant thruster with premixer," Transactions of the Japan Society for Aeronautical and Space Sciences, Space Technology Japan, vol. 19, no. 3, pp. 442–445, 2021, https://doi.org/10.2322/tastj.19.442.
 
Volume 19, Issue 4
2026
Pages 97-111

  • Receive Date 09 December 2025
  • Revise Date 21 December 2025
  • Accept Date 28 December 2025
  • First Publish Date 23 October 2026