A Method for Determining Design Parameters of Space Umbrella Antenna

Samipour, Sadjad; Toloei, Alireza; Batrakoff, Vladimir

doi:10.30699/jsst.2023.1403

A Method for Determining Design Parameters of Space Umbrella Antenna

Document Type : Original Research Paper

Authors

Sadjad Samipour ¹

Alireza Toloei ²

Vladimir Batrakoff ³

¹ Assistant Profesor, Faculty of New Technologies and Aerospace Engineering, Shahid Beheshti University, Tehran, Iran

² Associate Professor, Faculty of New Technologies and Aerospace Engineering, Shahid Beheshti University, Tehran, Iran

³ Ph.D., Department of Aerospace Structures Production, Kazan National Research Technical University, Kazan, Russia

10.30699/jsst.2023.1403

Abstract

Development in the aerospace industry is linked to the continuous pursuit of lightweight designs. Open-architecture composite structures are a new and novel use of composites for minimal-weight component design. It is reasonable to use efficient and advanced techniques such as radial braiding in the manufacturing of composite lattice tubular structures. In this article, an aerospace composite lattice tubular structure with a braided reinforcement system is studied. A method is developed to determine the parameters of the preform reinforcement. A new process has been created for the manufacture of lattice structures with a braided reinforcement system. A methodology has been developed for determining the technological parameters of radial braiding. A sample structure is manufactured and tested. Experimental studies of lattice structure samples were carried out in order to verify the methods for determining mechanical, structural, and technological parameters.

Keywords

Aerospace structure

Composite

Lattice structure

Radial braiding

Subjects

Space New Technologies

Article Title Persian

طراحی و توسعه فناوری ساخت المان های آنتن چتری فضایی

Authors Persian

سجاد سمیع پور ¹

علیرضا طلوعی ²

والادیمیر باتراکف ³

¹ استادیار، دانشکده فناوری های نوین و مهندسی هوافضا، دانشگاه شهید بهشتی، تهران، ایران

² دانشیار، دانشکده مهندسی فناوری های نوین و مهندسی هوافضا، دانشگاه شهید بهشتی، تهران، ایران

³ دکتری، دانشکده تولید سازه‌های هوافضایی، دانشگاه ملی تحقیقاتی فنی کازان، روسیه

Abstract Persian

توسعه صنعت هوافضا مستلزم تلاش دائم برای طراحی و ساخت سازه‌های سبک‌تر و کارآمدتر است. سازه‌های کامپوزیتی شبکه‌ای، کاربرد نوین و فناورانه از کامپوزیت‌ها برای کاهش وزن سازه‌های هوافضایی است. استفاده از روش‌های کارآمد و پیشرفته مانند بافت دورانی در ساخت سازه‌های استوانه‌ای کامپوزیتی شبکه‌ای مورد نیاز است. در این مقاله یک سازه استوانه‌ای شبکه‌ای کامپوزیتی تقویت شده با الیاف کربن بافته شده با کاربرد هوافضایی مورد مطالعه قرار گرفته‌ است. یک روش برای تعیین پارامترهای ساختاری پیش‌سازه، یک فرآیند جدید برای تولید سازه شبکه‌ای و همچنین یک روش برای تعیین پارامترهای تکنولوژیکی دستگاه بافت دورانی به منظور تولید پیش‌سازه توسعه داده شده‌ است. یک سازه نمونه ساخته‌ شده و مورد آزمایش قرار گرفته ‌است. مطالعات نرم افزاری و تجربی نمونه‌های سازه شبکه‌ای به منظور صحت سنجی روش‌های تعیین پارامترهای مکانیکی، سازه‌ای و تکنولوژیکی انجام شده است.

Keywords Persian

طراحی اجسام پرنده

آنتن فضایی چتری

سازه‌های کامپوزیتی هوافضایی

روش بافت دورانی الیاف

Zhang, D. Beale, and. R.M. Broughton, "Analysis of circular braiding process, Part 1: theoretical investigation of kinematics of the circular braiding process," Journal of Manufacturing Science and Engineering ASME, vol.121, p.p 345-350, 1999.
R Toloei , M Zarchi , and B Attaran ," Application of active suspension system to reduce aircraft vibration using pid technique and bees algorithm," International Journal of Computer Applications , Vol.98 , No 6 , 2014.
V. Lomov, A. Nakai, R.S. Parnas, S. Bandyopadhyay Ghosh, and I. Verpoest, "Experimental and theoretical characterisation of the geometry of flat two– and three–axial braids," Textile Research Journal. Vol .72, No 8, P.P 706–712, 2002.
Carey, A. Fahim, and M. Munro," Predicting elastic constants of 2D–braided fiber rigid and elastomeric–polymeric matrix composites," Journal of Reinforced Plastics and Composites, Vol. 23, No. 17, P.P 1845–1857, 2004.
Ayranci, and. J.P. Carey," Predicting the longitudinal elastic modulus of braided tubular composites using a curved unit–cell geometry," Composites Part B: Engineering, Vol. 41, No.3, P.P. 229–235, 2010.
T. Pierce,." 5-The geometry of cloth structure," Journal of Textile Instiute Transactions, Vol. 28. No.3, T 45–T97. 1937.
Carey, M. Munro, and A. Fahim, " Regression–based model for elastic constants of 2D braided/woven open mesh angle–ply composites," Polymer Composites, Vol. 26, No.2, P.P. 152–164, 2005.
Joalu, Y. Jiao, Y. Sun, and. L. Wei, " Experimental investigation of cut-edge effect on mechanical properties of three-dimensional braided composites," Materials & design, Vol.28, No.9, P.P 2417-2424, 2007.
K. Gideon, H. Zhou, Y. Li, B. sun, and B. GU "Quasi-static compression and compression-compression fatigue characteristics of 3D-braided carbon/epoxy tube," Journal of the Textile Institute, Vol. 107, No. 7, P.P. 938–948, 2016.
Ziyang, Y. Yan, L. Jie, Y. Hong, and F.Guo, "Progressive damage and failure analysis of three-dimensional braided composites subjected to biaxial tension and compression," Composite Structures, Vol. 185, P.P. 496–507, 2018.
Wang, B. Sun, and. B. Gu. " Numerical modeling on compressive behaviors of 3D-braided composites under high temperatures at microstructure level," Composite Structures, Vol. 160, P. P. 925–938, 2017.
D. Fang, J. Liang, Y. Wang, and B. L. Wang, "The effect of yarn distortion on the mechanical properties of 3D four-directional braided composites," Composites Part A: Applied Science and Manufacturing. Vol. 40, No. 4, P. P. 343–350, 2009.
Chen, X.M. Tao, and C.L. Choy "Mechanical analysis of 3-D braided composites by the finite multiphase element method," Composites and Technology Vol. 59, No. 16, P.P 2383-2391, 1999.
V. Vasil’ev, and. V. A. Bunakov, "Design axially compressed lattice composite cylindrical shells," Composite Structures, Vol. 2, P.P. 68–77, 2000.
V. Vasil’ev, V. A. Barynin, and A. F. Razin, "Anisogrid lattice composite structures – design and application in aerospace technology," Composites and nanostructures, Vol.3, P.P. 38–50, 2009.
A. Samipour, & V.V. Batrakov, "Determining the Design Parameters of Braided Aerospace Composite Lattice Structures," Journal of Machinery Manufacture and Reliability, Vol.51. No.1, P.P .71–79, 2022.
A. Samipour, and Ya. S. Danilov," Development and verification of an analytic technique to determine the stiffness parameters of braided tubular parts," Russian Aeronautics, Vol. 59, No. 4, P.P. 460-465, 2016.
A. Samipour, V. I. Khaliulin, and V. V. Batrakov , "Development of the Technology of Manufacturing Aerospace Composite Tubular Elements by Radial Braiding," Journal of Machinery Manufacture and Reliability, Vol. 47, No.3, P.P. 284-289, 2018.
S. A.Samipour, V. I. Khaliulin, and V. V. Batrakov, " A Method for Calculating the Parameters for Manufacturing Preforms via Radial Braiding," Journal of Machinery Manufacture and Reliability, Vol. 46, No. 3, P.P. 302–308, 2017.