[1] Deere, K. A., Berrier, B. L., Flamm, J. D. and Johnson, S. K., “A Computational Study of a New Dual Throat Fluidic Thrust Vectoring Nozzle Concept,” AIAA-2005-3502, July 2005.
[2] Flamm, J. D., Berrier, B. L., Johnson, S. K. and Deere, K. A.,“An Experimental Study of a Dual Throat Fluidic Thrust Vectoring Nozzle Concept,” AIAA-2005-3503, July 2005.
[3] Flamm, J. D., Deere, K. A., Mason, M. L., Berrier, B. L. and Johnson, S. K., “Experimental Study of an Axisymmetric Dual Throat Fluidic Thrust Vectoring Nozzle for a Supersonic Aircraft Application,” AIAA-2007-5084, 2007.
[4] Deere, K. A., Berrier, B. L., Flamm, J. D. and Johnson, S. K., “Computational Study of Fluidic Thrust Vectoring Using Separation Control in a Nozzle,” AIAA-2003-3803, 2003.
[5] Deere, K. A., Flamm, J. D., Berrier, B. L. and Johnson S. K., “Computational Study of an Axisymmetric Dual Throat Fluidic Thrust Vectoring Nozzle Concept for Supersonic Aircraft Application,” AIAA-2007-5085, 2007.
[6] Shin, C.S., Kim, H. D., Setoguchi, T. And Matsuo, S., “A Computational Study of Thrust Vectoring Control Using Dual Throat Nozzle,” Journal of Thermal Science, Vol, 19, 2010, pp.486−490.
[7] M. H. Hamedi, M. Jahromi, M. Mahmodi, J. Pirkandi, “Effect of Secondary Flow Injection Area on Thrust Vectoring Angle in Double Throat Nozzles,” Modares Mechanical Engineering, Vol.15, No.1, 2015, pp.117-125, (In Persian).
[8]
Gu, R. and
Xu, J., “Effects of Cavity on the Performance of Dual Throat Nozzle During the Thrust-Vectoring Starting Transient Process,”
J. Eng. Gas Turbines Power, Vol. 136, No.1, 2014, pp. 0145021-145026.
[9]
Gu, R. and
Xu, J., “Dynamic Experimental Investigations of a Bypass Dual Throat Nozzle,”
J. Eng. Gas Turbines Power, Vol. 137, No.8, 2015, pp. 084501-084501-6,
[10] Li, L., Hirota, M., Ouchi, K. and Saito, T., “evaluation of Fluidic Thrust Vectoring Nozzle via Thrust Pitching Angle and Thrust Pitching Moment,” Shock Wave, Vol. 27, 2017, pp. 53-61,
[11] Menter, F. R., “Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications,” AIAA Journal, Vol.32, 1994, pp. 1598-1605.
[12] Fluent, “User’s Guide Fluent 6.3.26, Fluent Incorporated,” Lebanon, NH, 2006.
[13] Hamedi E M. H. and Jahromi, M. “Numerical simulation of turbulent compressible flows in a CD nozzle with different Divergence Angles,” Journal of Heat and Mass Transfer Research, Vol.1, 2014, pp. 93-100.
[14] Balabel, A., Hegab, A.M., Nasr, M., and Samy M. El-Behery, “Assessment of Turbulence Modeling for Gas Flow in Two-Dimensional Convergent–Divergent Rocket Nozzle,” Applied Mathematical Modelling, Vol. 35, 2011, pp. 3408–3422.
[15] Van de Goor, B., Titan Gas Turbine Manual and Engine Log, AMT Netherlands, 2010.
[16] Mason, M. L., Putnam, L. E. and Richard, J. R., “The Effect of Throat Contouring on Two Dimensional Converging-Diverging Nozzles at Static Condition,” NASA Technical Paper 1704, 1980.
[17] Geatz, A. M., A Prediction Code for the Thrust Performance of Two Dimensional, Non-Axisymmetric, Converging Diverging Nozzles, (Thesis PhD) Air Force Institute of Technology, 2005.
