[1]ECSS-E-ST-31C Thermal Control General Requirements, 15 Nov. 2008.
[2]Nesamani, G.J.J., Joshi, S.C., Jin, Z., Chan, P.K. and Lee,S.C., “Design and Development of Thermal Test Model of a Micro-Satellite for Thermal Balance Test,” Aircraft Engineering and Aerospace Technology: An International Journal, Vol. 80, 2008, pp. 51–58.
[3]Jin, Z., Joshi, S.C., Nesamani, G.J.J., Chan, P.K., Ying, T.M., Goh, C.H., “Data Analysis and Correlation for Thermal Balance Test on a Micro-Satellite Model, Heat Transfer Engineering,” Vol. 31, No. 3, 2010, pp. 222–233.
[4]Beck, T., Bieler, A. and Thomas, N., “Numerical Thermal Mathematical Model Correlation to Thermal Balance Test Using Adaptive Particle Swarm Optimization (APSO),” Applied Thermal Engineering, Vol. 38, 2012, pp. 168-174.
[5]Anglada, E. and Garmendia, I., “Correlation of Thermal Mathematical Models for Thermal Control of Space Vehicles by Means of Geneticalgorithms,” Acta Astronaut, Vol. 108, 2015, pp. 1–17.
[6]Garmendia, I. and Anglada, E., “Thermal Athematical Model Correlation Through Genetic Algorithms of an Experiment Conducted on Board the International Space Station,” Acta Astronautica, Vol. 122, 2016, pp. 63–75.
[7]Ramezani-Najafi, H., Moini, E., Karimian, S.M.H. and Alisadeghi, H., “Evaluation of Effective Emissivity of a Multilayer Insulation Blanket Using Test,” Journal of Space Science and Technology (JSST), Vol. 8, No. 1,spring 2015, pp. 19-25 (In Persian).
[8]Gilmore, D.G., Spacecraft Thermal Control Handbook Vol. I, Fundamental Technologies, AIAA Press, 2nd Edition, 2002.
[9]Fang, G., Zhou, J. and Duszczyk, J., “Extrusion of 7075 Aluminium Alloy Through Double-Pocket Dies to Manufacture a Complex Profile,” Journal of Materials Processing Technology, Vol. 209, 2009, pp.3050- 2059.