[1] Manlik, O., Lacy, R.C. and Sherwin, W.B. "Applicability and limitations of sensitivity analyses for wildlife management," Journal of Applied Ecology, vol. 55, no. 3, 2018, pp. 1430-1440.
[2] Choi, K.K. and Kim, N.-H. Structural sensitivity analysis and optimization 1: linear systems. Springer Science & Business Media, 2006.
[3] Ohsaki, M., Optimization of finite dimensional structures. CRC Press, 2016.
[4] Hamby, D., "A review of techniques for parameter sensitivity analysis of environmental models," Environmental monitoring and assessment, vol. 32, no. 2, 1994, pp. 135-154.
[5] Yuan, Z., Liang, P., Silva, T., Yu, K. and Mottershead, J.E., "Parameter selection for model updating with global sensitivity analysis," Mechanical Systems and Signal Processing, vol. 115, pp. 483-496, 2019.
[6] Zhou, Y., Lu, Z., Cheng, K. and Yun, W., "A Bayesian Monte Carlo-based method for efficient computation of global sensitivity indices," Mechanical Systems and Signal Processing, vol. 117, 2019, pp. 498-516.
[7] Iooss, B. and Lemaître, P,. "A review on global sensitivity analysis methods," in Uncertainty management in simulation-optimization of complex systems: Springer, 2015, pp. 101-122.
[8] Kala, Z. and Valeš, J., "Global sensitivity analysis of lateral-torsional buckling resistance based on finite element simulations," Engineering Structures, vol. 134, pp. 37-47, 2017.
[9] Yang, H., Wen, J., Wang, S., Li, Y., Tu, J. and Cai, W., "Sobol sensitivity analysis for governing variables in design of a plate-fin heat exchanger with serrated fins," International Journal of Heat and Mass Transfer, vol. 115, 2017, pp. 871-881.
[10] Fatemi, A., Ionel, D. M., Demerdash, N. A., Stretz, S.J. and Jahns, T.M., "RSM-DE-ANN method for sensitivity analysis of active material cost in PM motors," in Energy Conversion Congress and Exposition (ECCE), 2016 IEEE, 2016, pp. 1-7.
[11] Bates, S., Sienz, J. and Toropov, V., "Formulation of the optimal Latin hypercube design of experiments using a permutation genetic algorithm," in 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, 2004, p. 2011.
[12] Meibody H., M. N. P. N., Ommi, F., "Adaptive Surrogate Modeling Algorithm for Meta-model Based Design Optimization: A Case Study," Int. J. Industrial and Systems Engineering, 2020.
[13] Eppinger, S.D. and Browning, T.R., Design structure matrix methods and applications. MIT press, 2012.
[14] Naseh,
H., Meibody.
M.M.N.P., Hosseini Anari,
H., Ommi,
F., "Numerical-parametrical analysis on the hydrogen peroxide catalyst bed for space monopropellant thruster applications,"
Journal of Applied Research of Chemical-Polymer Engineering, vol. 1, no. 2END, 2018 (In Persian).
[15] Hwang, C.H., Lee, S. N., Baek, S.W., Han, C. Y., Kim, S. K. and Yu, M. J. "Effects of Catalyst Bed Failure on Thermochemical Phenomena for a Hydrazine Monopropellant Thruster Using Ir/Al2O3 Catalysts," Industrial & Engineering Chemistry Research, vol. 51, no. 15, 2012, pp. 5382-5393.
[16] H. M. Ghassemi, M. N.P. ; Asghari, I., "Experimental investigation on Specific velocity of Hydrogenperoxid monopropellant thruster," presented at the The 11 th Iranian Aerospace Society Conference, Tehran, Iran, March 1-3, 2011.
[17] Chen, X. and et al., "A novel catalyst for hydrazine decomposition: molybdenum carbide supported on γ-Al 2 O 3," Chemical Communications, no. 3, 2002, pp. 288-289.
[18] Kesten, A., "Analytical study of catalytic reactors for hydrazine decomposition," NASA UARL G 910461, 1968.
[19] Meibody, M., Naseh, H. and Ommi, F., "A kriging based multi objective gray wolf optimization for hydrazine catalyst bed," Engineering Solid Mechanics, vol. 7, no. 3, 2019, pp. 179-192.
[20] Meibody, M.N.P., Naseh, H. and Ommi, F., "Progressive Latin Hypercube sampling-based robust design optimisation (PLHS-RDO)," Australian Journal of Mechanical Engineering, 2020, pp. 1-8.
