[1] Paul, C.R.., Introduction to Electromagnetic Compatibility, 2nd Ed., John Wiley & Sons, 2006.
[2] Armstrong, K., Design Techniques for EMC, EMC Compliance Journal, 2006-2009.
[3] Rahmat-Samii, Y. and Mosallaei, H., "Electromagnetic Band-Gap Structures: Classification, Characterization, and Applications," 2001 Eleventh International Conference on Antennas and Propagation, (IEE Conf. Publ. No. 480), Manchester, UK, vol.2, 2001, pp. 560-564.
[4] De Maagt, P., Gonzalo, R., Vardaxoglou, J. and Baracco, J-M, “Review of electromagnetic-bandgap technology and applications,” URSI Radio Science Bulletin, No. 309, June 2004, pp.11-25.
[5] Kildal, P., Alfonso, E., Valero-Nogueira, A., Rajo-Iglesias, E. “Local metamaterial-based waveguides in gaps between parallel metal plates,” IEEE Antennas Wirel. Propag. Lett., vol. 8, 2009, pp. 84–87.
[6] Kildal, P. S., “Three metamaterial-based gap waveguides between parallel metal plates for mm/submm waves,” Proceedings of the Third European Conference on Antennas and Propagation, EuCAP, 2009, pp. 28–32.
[7] Rajo-Iglesias, E., and Kildal, P. S., “Numerical studies of bandwidth of parallel-plate cut-off realised by a bed of nails, corrugations and mushroom-type electromagnetic bandgap for use in gap waveguides,” IET Microwaves, Antennas & Propagation, vol. 5, no. 3, pp. 282–289, 2011.
[8] Pucci, E., “Gap Waveguide Technology for Millimeter Wave Applications and Integration with Antennas” Thesis for the degree of Doctor of Philosophy, Chalmers, Sweden, 2013.
[9] Zaman, A. U., Iglesias E. R., and Kildal P. S., "Prospective new PMC Based Gap Waveguide Shielding for Microwave Modules." Proceedings of IEEE International Symposium on Electromagnetic Compatibility (EMC Europe 2014), Gothenburg, Sweden, Sept. 2014.
[10] Kildal, P., Maci S., Valero-nogueira A., Kishk A. and Rajo-iglesias E., “The Gap Waveguide as a Metamaterial-based Electromagnetic Packaging Technology Enabling Integration of MMICs and Antennas up to THz,” Proceedings of the 5th Eurpean Conference on Antenna and Propagation, Rome, Italy, 2011, pp. 3715–3718.
[11] Zaman, A. U., Yang, J. and Kildal, P., “Using Lid of Pins for Packaging of Microstrip Board for Descrambling the Ports of Eleven Antenna for Radio Telescope Applications,” IEEE Antennas and Propagation Society International Symposium, Toronto, Canada, 2010.
[12] Zhang, J., Zhang, X., Shen, D. and Kishk, A. A. "Design of packaged microstrip line." IEEE International Conference on Microwave and Millimeter Wave Technology (ICMMT), vol. 1, 2016, pp. 82-84.
[13] Zhang, J., “Dielectric Filled Printed Gap Waveguide for Millimeter Wave Applications” Thesis for the degree of Doctor of Philosophy, Concordia, Canada, 2017.
