[1] N. H. M. Rais, P. J. Soh, F. Malek, S. Ahmad, N. B. M. Hashim and P. S. Hall ''A review of wearable antenna," in Loughborough Antennas & Propagation Conference, Loughborough, UK, 2009, pp. 225-228, https://doi.org/10.1109/LAPC.2009.5352373.
[2] A. Tsolis, "Wearable antennas: design, connectivity, and evaluation measurement techniques," Ph.D. dissertation, Loughborough University Institutional Repository, UK, 2016.
[3] R. Negra, I. Jemili, and A. Belghith, "Wireless body area networks: Applications and technologies," Procedia Computer Science, vol. 83, pp. 1274-1281, 2016, https://doi.org/10.1016/j.procs.2016.04.266.
[4] S. Zhu and R. Langley, ''Dual-band wearable textile antenna on an EBG substrate,'' IEEE Transactions on Antennas and Propagation, vol. 57, no. 4, pp. 926-935, 2009, https://doi.org/10.1109/TAP.2009.2014527.
[5] J. C. G. Matthew, B. Pirollo, A. Tyler, and G. Pettitt, ''Body wearable antennas for UHF/VHF'', in Loughborough Antennas and Propagation Conference, Loughborough, UK, 2008, pp. 132-136, https://doi.org/10.1109/LAPC.2008.4516940.
[6] A. Y. I. Ashyap et al., "An overview of electromagnetic band-gap integrated wearable Antennas," IEEE Access, vol. 8, pp. 7641-7658, 2020, https://doi.org/10.1109/ACCESS.2020.2963997.
[7] IEEE Standards for Safety Levels with Request to Human Exposure to Radio Frequency Electromagnetic Fields, 3 Khz to 300ghz. IEEE C95.1- 1991(Revision of ANSI C95.1-1982), Institute of Electrical and Electronics Engineers, Inc., 1992.
[8] "Guidelines for limiting exposure to time-varying electric magnetic, and electromagnetic fields (up to 300GHz)," International Commission on Non-Ionizing Radiation Protection (ICNIRP), Health Phys., 74(4), pp. 494-522, 1998.
[9] A. Smida, A. Iqbal, A. J. Alazemi, M. I. Waly, R. Ghayoula, and S. Kim ''Wideband wearable antenna for biomedical telemetry applications,'' IEEE Access, vol. 8, pp. 15687-15694, 2020, https://doi.org/10.1109/ACCESS.2020.2967413.
[10] A. Y. I. Ashyap et al., ''Inverted e-shaped wearable textile antenna for medical applications,'' IEEE Access, vol. 6, pp. 35214-35222, 2018, https://doi.org/10.1109/ACCESS.2018.2847280.
[11] R. Jothi Chitra, V. Nagarajan, and D. Mukesh, "Design of wearable pentagonal fractal antenna for soldier location tracking," in International Conference on Communication and Signal Processing (ICCSP), Chennai, India, 2020, pp. 110-113, https://doi.org/10.1109/ICCSP48568.2020.9182179.
[12] A. Arif, M. Zubiar, M. Ali, M. U. Khan, and M. Q. Mehmood, ''A compact, low-profile fractal antenna for wearable on-body WBAN applications, '' IEEE Antennas and Wireless Propagation Letters, vol. 18, no. 5, pp. 981-985, 2019, https://doi.org/10.1109/LAWP.2019.2906829.
[13] M. E. Gharbi, M. Martinez-Estrada, Raul Frenandez-Garcia, S. Ahyoud, and I. Gill "A novel ultra-wide band wearable antenna under different bending conditions for electronic-textile applications," The Journal of the Textile Institute, vol. 112, no. 3, pp. 437-443, 2020, https://doi.org/10.1080/00405000.2020.1762326.
[14] A. ALI, S. N. Azemi, M. Jusoh, and T. Sabapathy, "Defected ground plane of wearable circular patch antenna," in IOP Conference Series: Materials Science and Engineering, Volume 767, 1st International Symposium on Engineering and Technology (ISETech), Perlis, Malaysia, 2019, https://doi.org/10.1088/1757-899X/767/1/012003.
[15] A. Ennajih, B. Nasiri, J. Zbitou, A. Errkik, and M. Latrach, "A wearable UHF RFID tag antenna-based metamaterial for biomedical applications," Bulletin of Electrical Engineering and Informatics, vol. 9, no. 2, pp. 676-684, 2020, https://doi.org/10.11591/eei.v9i2.1661.
[16] S. Roy and U. Chakraborty, "Metamaterial based dual wideband wearable antenna for wireless applications," Wireless Personal Communications, vol. 106, pp. 1117–1133, 2019, https://doi.org/10.1007/s11277-019-06206-3.
[17] A. Sharifi and J. Khalilpour, " Patch antenna gain enhancement with meta-material spilt ring resonator radome," Journal of Applied Electromagnetics, vol. 3, no. 3, pp. 39-43, 2015, (in Persian).
[18] S. Yan, P. J. Soh, and G. A. E. Vandenbosch, ''Low-profile dual-band textile antenna with artificial magnetic conductor plane,'' IEEE Transactions Antennas Propagation, vol. 62, no. 12, pp. 6487-6490, 2014, https://doi.org/10.1109/TAP.2014.2359194.
[19] H. Babaei, S. A. Gohari, and P. Mohamadi, ''Design, simulation, fabrication and determining the equivalent circuit model of a reconfigurable RFSS unit cell filter for electromagnetic protection of space payload systems,'' Journal of Space Science and Technology, vol. 16, no. 4, pp. 71-82, 2023, (in Persian), https://doi.org/10.30699/jsst.2023.1448.
[20] A. Y. I. Ashyap et al., ''Highly efficient wearable CPW antenna enabled by EBG-FSS structure for medical body area network applications,'' IEEE Access, vol. 6, pp. 77529-77541, 2018, https://doi.org/10.1109/ACCESS.2018.2883379.
[21] G. P. Gao, B. Hu, S. Wang, and C. Yang, ''Wearable circular ring slot antenna with EBG structure for wireless body area network,'' IEEE Antennas Wireless Propagation Letter, vol. 17, no.3, pp. 434-437, 2018, https://doi.org/10.1109/LAWP.2018.2794061.
[22] A. Y. I. Ashyap et al., ''Robust and efficient integrated antenna with EBG-DGS enabled wide bandwidth for wearable medical device applications,'' IEEE Access, vol. 8, pp. 56346-56358, 2020, https://doi.org/10.1109/ACCESS.2020.2981867.
[23] O. A. Saraereh, ''Microstrip wearable dual-band antenna design for on body wireless communications,'' in 4th International Conference on Computer and Communication Systems (ICCCS), Singapore, 2019, pp. 585-589, https://doi.org/10.1109/CCOMS.2019.8821765.
[24] M. G. Huang, Z. M. Xie, and X. Z. Lai, ''A compact multiband PIFA for handheld RFID applications,'' Microwave and. Optical Technology Letters, vol. 58, no. 8, pp. 1934-1937, 2016, https://doi.org/10.1002/mop.29937.
[25] P. Rahmatian, M. Movahedi, and A. Ghafoorzadeh-Yazdi, ''Dual-band dual-mode wearable antenna for on-off body communication based on metamaterial,'' in 26th Iranian Conference on Electrical Engineering, Mashhad, Iran, 2018, pp. 649-653, (in Persian) https://doi.org/10.1109/ICEE.2018.8472524.
[26] H. Yang and X. Liu, ''Wearable dual-band and dual-polarized textile antenna for on-and off-body communications,'' IEEE Antennas and Wireless Propagation Letters, vol. 19, no. 12, pp. 2324– 2328, 2020, https://doi.org10.1109/LAWP.2020.3032540.
[27] J. Dong, Q. Li, and L. Deng, ''Compact planar ultra-wideband antennas with 3.5/5.2/5.8 GHz triple band-notched characteristics for internet of things applications,'' Sensors, vol. 17, no. 2, 2017, Art. no. 349, https://doi.org/10.3390/s17020349.
[28] D. Mathur, S. K. Bhatnagar, and V. Sahula, ''Quick estimation of rectangular patch antenna dimensions based on equivalent design concept,'' IEEE Antennas and Wireless Propagation Letters, vol. 13, pp. 1469–1472, 2014, https://doi.org/10.1109/LAWP.2014.2334362.
[29] M. Mathur, A. Vats, and A. Agarwal, ''A new design formulae for feed line dimensions of the rectangular microstrip patch antenna by using equivalent design concept,'' in International Conference on Signal Processing and Communication (ICSC), Noida, India, 2015, pp. 34-39, https://doi.org/10.1109/ICSPCom.2015.7150629.
[30] A. Bouazizi, G. Zaibi, A. Iqbal, A. Basir, M. Samet, and A. Kochouri, ''A dual-band case-printed planar inverted-F antenna design with independent resonance control for wearable short-range telemetric systems,'' International Journal of RF and Microwave Computer-Aided Engineering, vol. 29, no. 8, 2019, Art. no. e.21781, https://doi.org/10.1002/mmce.21781.
[31] A. Afridi, S. Ullah, S. Khan, A. Ahmed, A. H. Khalil, and M. Ahmad Tarar , ''Design of dual band wearable antenna using metamaterials,'' Journal of Microwave Power and Electromagnetic Energy, vol. 47, no. 2, pp. 126-137, 2013, https://doi.org/10.1080/08327823.2013.11689852.
[32] S. Agneessens and H. Rogier, ''Compact half diamond dual-band textile HMSIW on-body antenna, '' IEEE Transactions on Antennas and Propagation, vol. 62, no. 5, pp. 2374-2381, 2014, https://doi.org/10.1109/TAP.2014.2308526.
