<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ArticleSet PUBLIC "-//NLM//DTD PubMed 2.7//EN" "https://dtd.nlm.nih.gov/ncbi/pubmed/in/PubMed.dtd">
<ArticleSet>
<Article>
<Journal>
				<PublisherName>ARI, IAS</PublisherName>
				<JournalTitle>Journal of Space Science and Technology</JournalTitle>
				<Issn>2008-4560</Issn>
				<Volume>18</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2025</Year>
					<Month>06</Month>
					<Day>22</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Magnetometer Calibration Using a Nonlinear Optimal Approach</ArticleTitle>
<VernacularTitle>کالیبراسیون مغناطیس‌سنج با استفاده از رویکرد بهینه غیرخطی</VernacularTitle>
			<FirstPage>1</FirstPage>
			<LastPage>9</LastPage>
			<ELocationID EIdType="pii">219074</ELocationID>
			
<ELocationID EIdType="doi">10.22034/jsst.2025.1512</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Amir</FirstName>
					<LastName>Labibian</LastName>
<Affiliation>Assistant Professor, Satellite Research Institute, Iranian Space Research Center, Tehran, Iran</Affiliation>
<Identifier Source="ORCID">0000-0002-2155-7102</Identifier>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2024</Year>
					<Month>12</Month>
					<Day>05</Day>
				</PubDate>
			</History>
		    <Abstract>Magnetometer is one of the main sensors in satellite attitude determination and control subsystems and its data calibration plays an important role in mission’s success. In this paper, the subject of magnetometer calibration using two optimal approaches is analyzed and their robustness in the presence of measurement disturbances is investigated. In this regard, firstly, a measurement model which contains main magnetometer parameters, namely, biases, scale factors and non-orthogonality corrections is presented. Then, two approaches for magnetometer calibration are proposed. In the first approach which is a centered method, nonlinear magnetometer calibration problem is transferred to a linear problem and calibration parameters are derived. However, in the second method which is based on maximum likelihood approach, magnetometer calibration problem is considered as a nonlinear problem and calibration parameters are estimated. Two kinds of magnetic field profiles are considered to evaluate the performance of calibration methods for a LEO satellite. According to the results, accuracy of the maximum likelihood approach is much better than centered method. Finally, in order to assess the robustness of the two presented methods, 100 Monte Carlo simulations are performed. Based on the Monte Carlo simulations results, estimation of calibration parameters using maximum likelihood approach is much smoother and calibration parameters are estimated more accurately.</Abstract>
			<OtherAbstract Language="FA">حسگر مغناطیسی از حسگرهای کلیدی در زیرسیستم تعیین و کنترل وضعیت ماهواره بوده و کالیبراسیون داده‌های آن نقشی اساسی در موفقیت ماموریت دارد. در این مقاله موضوع کالیبراسیون حسگر مغناطیسی با استفاده از دو رویکرد متمرکز و بیشینه احتمال دو مرحله‌ای مورد تحلیل قرار گرفته و میزان مقاومت آنها به اختلالات موجود در اندازه‌گیری بررسی می‌شود. در این راستا پس از ارائه مدل اندازه‌‎گیری حسگر مغناطیسی که ارتباط بین بردار میدان مغناطیسی زمین، بردار اندازه‌گیری و اختلالات را نشان می‌دهد، دو رویکرد برای حل مسئله کالیبراسیون مطرح شده است. ابتدا با استفاده از روش متمرکز، مسئله غیرخطی کالیبراسیون به مسئله‌ای خطی تبدیل شده و سپس پارامترهای کالیبراسیون استخراج می‌شوند. در ادامه، در رویکرد دوم، مسئله کالیبراسیون بصورت یک مسئله غیرخطی در نظر گرفته شده و با استفاده از روش بیشینه احتمال پارامترهای کالیبراسیون تخمین زده می‌شوند. به جهت ارزیابی عملکرد دو روش ارائه شده، دو نوع پروفایل میدان مغناطیسی برای یک ماهواره LEO مد نظر قرار گرفته است. نتایج نشان می‌دهند که خطای روش بیشینه احتمال دو مرحله‌ای به مراتب کمتر از روش متمرکز است. در انتها و به جهت بررسی مقاومت روش‌ها به اختلالات اندازه‌گیری، 100 اجرا برای شبیه‌سازی مونت کارلو در نظر گرفته می‌شود. نتایج حاصل از شبیه‌سازی مونت کارلو نشان دهنده رفتار هموارتر و همچنین خطای کمتر روش بیشینه احتمال نسبت به روش متمرکز است.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Magnetometer</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Calibration</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">optimal</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Maximum-likelihood</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Monte Carlo simulation</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://www.jsstpub.com/article_219074_fad1c996eac7c2c4b405873b4348db77.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>ARI, IAS</PublisherName>
				<JournalTitle>Journal of Space Science and Technology</JournalTitle>
				<Issn>2008-4560</Issn>
				<Volume>18</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2025</Year>
					<Month>06</Month>
					<Day>22</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Comparison of G-Hot Plate and Three Point Methods to Measure Thermal Conductivity of Fibrous Insulation</ArticleTitle>
<VernacularTitle>مقایسه روش‌های آزمایش صفحه داغ حفاظ‌دار و سه نقطه برای اندازه‌گیری ضریب انتقال حرارتی در عایق‌های فیبری</VernacularTitle>
			<FirstPage>10</FirstPage>
			<LastPage>23</LastPage>
			<ELocationID EIdType="pii">225095</ELocationID>
			
<ELocationID EIdType="doi">10.22034/jsst.2025.1508</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Amin</FirstName>
					<LastName>Torabi</LastName>
<Affiliation>PhD., Department of Engineering Aerospace, Shahid Sattari Aeronautical University, Tehran, Iran</Affiliation>
<Identifier Source="ORCID">0000-0002-6577-6673</Identifier>

</Author>
<Author>
					<FirstName>Seyed Mohammad</FirstName>
					<LastName>Nikouei</LastName>
<Affiliation>Phd., Department of Engineering Aerospace, Shahid Sattari Aeronautical University, Tehran, Iran</Affiliation>
<Identifier Source="ORCID">0000-0003-4940-7293</Identifier>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2024</Year>
					<Month>11</Month>
					<Day>17</Day>
				</PubDate>
			</History>
		    <Abstract>Laboratory methods for steady-state and transient testing are two well-known approaches for measuring the heat transfer coefficient. Transient methods are more widely used due to their lower cost and broader temperature range. However, their application in fibrous insulation is more limited due to the low thermal conductivity and non-homogeneous nature of these materials. Guarded hot plate and three-point methods are two significant transient techniques for measuring the heat transfer coefficient in fibrous insulations. This paper compares these two testing methods, with the primary evaluation criterion being the minimum variance in the final experimental results. The variance of the final results is inversely proportional to the determinant of the sensitivity matrix. To compute the sensitivity matrix, the transient temperature distribution across the insulation thickness is first calculated using an initial estimate of the heat transfer coefficient, obtained from other experimental sources. Changes in the number and placement of thermal sensors, the insulation geometry, and the test duration affect the determinant of the sensitivity matrix. The optimal experiment is determined by identifying the maximum determinant of this matrix. Studies show that in the three-point method, the optimal setup consists of two thermal sensors placed on an insulation layer with a thickness of 2 cm, over a duration of 100 seconds. In contrast, in the guarded hot plate method, the optimal setup includes two thermal sensors on insulation with a height of 5 cm, over a 300-second testing period. The analysis indicates that the variance of the final results in the three-point method is lower than in the guarded hot plate method, which can significantly enhance the accuracy of heat transfer coefficient measurements.</Abstract>
			<OtherAbstract Language="FA">روش‌های آزمایشگاهی پایا و گذرا دو روش شناخته‌شده برای اندازه‌گیری ضریب انتقال حرارت هستند. روش‌های گذرا به دلیل هزینه پایین و طیف دمایی گسترده‌تر کاربرد بیشتری دارند. ولی در مورد عایق‌های فیبری کاربرد روش‌های گذرا کمتر است. این موضوع به دلیل رسانایی ضعیف، نمونه‌های غیرهمگن در این عایق‌ها است. صفحه داغ حفاظ‌دار و سه نقطه، دو روش مهم در اندازه‌گیری ضریب انتقال حرارت در عایق‌های فیبری محسوب می‌شوند. این مقاله به مقایسه این دو روش آزمایش پرداخته و معیار اصلی بررسی، حداقل واریانس در نتیجه نهایی آزمایش است. واریانس نتیجه نهایی نسبت معکوس با دترمینان ماتریس حساسیت دارد. برای محاسبه ماتریس حساسیت، ابتدا توزیع دما در ضخامت عایق حرارتی به‌صورت گذرا و با در نظر گرفتن تخمین اولیه برای ضرایب انتقال حرارت محاسبه می‌شود. این تخمین اولیه از داده‌های آزمایشگاهی منابع دیگر به‌دست آمده است. تغییر در تعداد سنسورهای حرارتی، محل قرارگیری آنها، هندسه عایق و مدت زمان آزمایش باعث تغییر در مقدار دترمینان ماتریس حساسیت خواهد شد. آزمایش بهینه با یافتن مقدار بیشینه این دترمینان مشخص می‌شود. بررسی‌ها نشان می‌دهند که در روش آزمایش گذرای سه نقطه، حالت بهینه استفاده از دو سنسور حرارتی بر روی عایق با ضخامت ۲ سانتی‌متر طی ۱۰۰ ثانیه است، در حالی که در روش صفحه داغ حفاظ‌دار، حالت بهینه شامل دو سنسور حرارتی روی عایق با ارتفاع ۵ سانتی‌متر طی ۳۰۰ ثانیه می‌باشد. تحلیل‌ها نشان می‌دهند که واریانس نتیجه نهایی در روش سه نقطه، کمتر از روش صفحه داغ حفاظ‌دار است، که می‌تواند تأثیر مهمی بر دقت اندازه‌گیری ضریب انتقال حرارت داشته باشد.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">experiment design</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">High Temperature Insulator</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Transient Experiment</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">3 point method</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Guarded Hot plate method</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://www.jsstpub.com/article_225095_c9dcfff803802ba7724bd0ee2939a9d5.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>ARI, IAS</PublisherName>
				<JournalTitle>Journal of Space Science and Technology</JournalTitle>
				<Issn>2008-4560</Issn>
				<Volume>18</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2025</Year>
					<Month>06</Month>
					<Day>22</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Evaluating the Impact of Design Changes in Remote Sensing Satellites Using Design Structure Matrix</ArticleTitle>
<VernacularTitle>ارزیابی تأثیر تغییرات طراحی در ماهواره‌های سنجشی با استفاده از ماتریس ساختار طراحی</VernacularTitle>
			<FirstPage>24</FirstPage>
			<LastPage>40</LastPage>
			<ELocationID EIdType="pii">219073</ELocationID>
			
<ELocationID EIdType="doi">10.22034/jsst.2025.1505</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Mohammad</FirstName>
					<LastName>Sayanjali</LastName>
<Affiliation>Assistant Professor, Satellite Research Institute, Iranian Space Research Center, Tehran, Iran</Affiliation>
<Identifier Source="ORCID">0009-0006-9040-9054</Identifier>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2024</Year>
					<Month>10</Month>
					<Day>22</Day>
				</PubDate>
			</History>
		    <Abstract>Designing complex systems, especially in the space industry, is accompanied by challenges such as changes in components and their interactions. This article aims to facilitate the design of complex systems by introducing and examining the design structure matrix (DSM). The design structure matrix, by analyzing the relationships between components, helps improve the speed of design and implement optimal changes in systems. This article discusses the features and analyses of this matrix, as well as its limitations and challenges. Two matrices are developed for a remote sensing satellite under study. The first matrix is designed to examine the influence of each component on the design of other components. In this matrix, all components are listed along both the rows and columns (meaning it&#039;s a square matrix), and if one component affects the design of another, this influence is indicated in the matrix. These effects are determined by the design team of each subsystem. Furthermore, both direct and indirect effects are considered in the formation of this matrix, and the calculation method is detailed in this paper. The second matrix examines the relationships between different components. These relationships include electrical, mechanical, data, or thermal connections, which are identified based on design blueprints and represented in the matrix. A matrix is also developed to assess the impact of each component on the design of other components, and efforts have been made to make this matrix practical by examining and weighting the effects of components on each other. With the help of these two matrices, the impact of changing one component (adding, removing, or altering the design) on other components is examined. Additionally, for better analysis, a case study is conducted. In this case study, the impact of adding a star sensor to the considered satellite is investigated and required technical changes for supporting on extra star sensor, such as data interface and power line or mechanical interface have been investigated. The defined matrices increase the design speed for more technical and precise analyses and provide the expert with the tool to apply changes in the system in less time and without creating excessive design cycles.</Abstract>
			<OtherAbstract Language="FA">طراحی سیستم‌های پیچیده، به‌ویژه در صنعت فضایی، با چالش‌هایی مانند ایجاد تغییر در اجزا و تاثیر متقابل آنها همراه است. این مقاله با هدف تسهیل طراحی سیستم‌های پیچیده به معرفی و بررسی ماتریس طراحی (DSM) می‌پردازد. ماتریس ساختار طراحی با بررسی ارتباطات بین اجزاء، به بهبود سرعت طراحی و انجام تغییرات بهینه در سیستم‏ها کمک می‌کند. در این مقاله به ویژگی­­ها و تحلیل­های این ماتریس اشاره شده و محدودیت­ها و چالش­های آن را بیان می‏کند. سپس به کمک همین روش، دو ماتریس برای ماهواره سنجشی مورد مطالعه ترسیم می‏شود. ماتریس اول برای بررسی تاثیر هر جزء بر طراحی جزء دیگر می‏باشد. در این ماتریس تمامی اجزا در طول و عرض ماتریس قرار می‏گیرند(یعنی ماتریس مربعی) و در صورتی که یک جزء در طراحی جزء دیگر تاثیرگذار باشد، در ماتریس این تاثیر را نمایش می‏دهیم. این تاثیرات توسط تیم طراحی هر زیرسیستم تعیین می‏شود. همچنین تاثیرات مستقیم و غیر مستقیم در تشکیل این ماتریس لحاظ شده است که در این مقاله نحوه محاسبه آن تشریح شده‏است. در ماتریس دوم، ارتباطات بین اجزاء مختلف مورد بررسی قرار گرفته‏است. این ارتباطات شامل ارتباط الکتریکی، مکانیکی، داده‏ای یا حرارتی می‏باشد که با توجه به نقشه‏های طراحی این ارتباطات مشخص شده و در ماتریس مورد نظر نمایش داده‏ می‏شود.  که یک ماتریس برای بررسی تاثیر هر جزء در طراحی سایر اجزاء ترسیم شده که با توجه به بررسی‏های انجام شده و وزن­دهی به تاثیرات اجزاء بر یکدیگر  سعی در کاربردی شدن این ماتریس شده‏است. به کمک این دو ماتریس تاثیر تغییر یک جزء (اضافه شدن، حذف و یا تغییر در طراحی) بر سایر اجزاء مورد بررسی قرار می‏‏گیرد. همچنین برای بررسی بهتر، یک مطالعه‏ی موردی انجام شده است. در این مطالعه موردی،  تاثیر اضافه کردن یک سنسور ستاره بر روی ماهواره مورد نظر بررسی شده است و تغییرات مورد نیاز به منظور پشتیبانی از یک سنسور ستاره دیگر همانند تامین خط تغذیه، خط ارتباطی و.. نمایش داده شده است.  ماتریس‏های تعریف شده، سرعت طراحی را  برای بررسی‏های فنی‏تر و دقیق‏تر افزایش می‏دهد و به فرد خبره این ابزار را ارائه می‏دهد که در زمان کمتر و بدون ایجاد چرخه‏های طراحی بیش از حد، تغییرات را در سیستم اعمال نماید.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Design Structure Matrix (DSM)</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">remote sensing satellite</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">System Changes</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Conceptual design</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Change Managment</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://www.jsstpub.com/article_219073_746fe476edf6fdb1b6464500637c4556.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>ARI, IAS</PublisherName>
				<JournalTitle>Journal of Space Science and Technology</JournalTitle>
				<Issn>2008-4560</Issn>
				<Volume>18</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2025</Year>
					<Month>06</Month>
					<Day>22</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Design of Reflective-Type Muffler for Acoustic Noise Control in Space Missions: Numerical and Analytical Approach</ArticleTitle>
<VernacularTitle>طراحی مافلر انعکاسی جهت کنترل نوفه‌‌‌ی آکوستیک در مأموریت‌های فضایی: رویکرد تحلیلی-عددی</VernacularTitle>
			<FirstPage>41</FirstPage>
			<LastPage>50</LastPage>
			<ELocationID EIdType="pii">216304</ELocationID>
			
<ELocationID EIdType="doi">10.22034/jsst.2025.1523</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Iman</FirstName>
					<LastName>Bahman Jahromi</LastName>
<Affiliation>Assistant Professor, Aerospace Research Institute, Ministry of Science, Research and Technology, Tehran, Iran</Affiliation>
<Identifier Source="ORCID">0000-0002-6411-3800</Identifier>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2025</Year>
					<Month>01</Month>
					<Day>19</Day>
				</PubDate>
			</History>
		    <Abstract>One of the most significant challenges in space missions is controlling the noise level within the cabin. Mufflers or silencers are employed to mitigate noise. In the present study, the performance of a basic reflective silencer is first investigated analytically and numerically in its simplest configuration. Based on the analytical evaluation of the base muffler, maximum performance occurs at odd multiples of π/2, while minimum performance is observed at integer multiples of π. Following the analytical analysis, extensions in the form of expanded tubes, designed based on the analytical findings, are added to the muffler. The performance of the reflective muffler is calculated using the sound transmission loss parameter and transfer matrix method, and the results are compared with numerical simulations. The findings reveal that while the numerical results generally align with the analytical predictions, discrepancies exist. Specifically, at frequencies above 1370 Hz, non-ideal effects are observed in the numerical results. As frequency increases, the acoustic wavefront inside the chamber deviates from a planar state, leading to reduced muffler efficiency at higher frequencies. Non-planar waves between the two extended tubes (with lengths L/2 and L/4) form at resonant frequencies of 1026 Hz and 1371 Hz. Although the emergence of non-planar waves disrupts muffler performance, the muffler with a single L/2 extension still outperforms the base muffler. Moreover, the configuration with two extended tubes (L/2 and L/4) exhibits the best performance among all tested mufflers.</Abstract>
			<OtherAbstract Language="FA">یکی از مهم‌ترین چالش‌ها در مأموریت‌های فضایی کنترل سطح صوت درون محفظه می‌باشد. جهت کنترل نویز از مافلرها یا صدا خفه‌کن‌ها استفاده می‌شود. در پژوهش حاضر، در ابتدا کارایی یک صداخفه‌کن انعکاسی در ساده ترین حالت به صورت تحلیلی و عددی بررسی می‌شود. با توجه به بررسی تحلیلی مافلر پایه، بیشینه عملکرد در ضرائب فرد π/2 و کمینه عملکرد در ضرائب صحیح عدد π اتفاق می‌افتد. با توجه به تحلیل‌های انجام شده افزونه‌هایی از نوع لوله‌های گسترش یافته با طراحی به دست آمده در قسمت تحلیلی به آن افزوده می‌شود. کارایی مافلر انعکاسی با توجه به پارامتر اتلاف عبوری صوت و به کارگیری ماتریس انتقال محاسبه و با حل عددی مقایسه شده است. نتایج نشان می‌دهند که عملکرد به دست آمده از حل عددی، علیرغم تطابق کلی با نتایج تحلیلی، تفاوت‌هایی با آن دارد. به طور مشخص در فرکانس‌های بیشتر از 1370 هرتز، اثرات غیر اید‌ه‌آل در نتایج عددی دیده می‌شوند. با افزایش فرکانس، جبهه موج آکوستیک درون محفظه از حالت صفحه‌ای خارج می‌شود و این موضوع باعث اختلال در عملکرد مافلر با افزایش فرکانس‌ می‌شود. امواج غیر صفحه‌ای مابین دو لوله مافلر با دو لوله افزایشی به طول L/2 و L/4 در فرکانس تشدید 1026 هرتز و 1371 تشکیل شده‌اند. هرچند تشکیل امواج غیر صفحه‌ای در عملکرد مافلر اختلال ایجاد می‌کند، ولی با این وجود کماکان مافلر با یک لوله توسعه یافته L/2، عملکرد بهتری از مافلر پایه و مافلر با دو لوله توسعه یافته L/2 و L/4، بهترین عملکرد از بین مافلرهای بررسی شده را دارد.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Reflective muffler</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Extended-tube</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Spacecraft acoustic</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Transfer matrix</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Acoustic isosurface</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://www.jsstpub.com/article_216304_5dcb7d49b71f874326bb74d21ae71848.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>ARI, IAS</PublisherName>
				<JournalTitle>Journal of Space Science and Technology</JournalTitle>
				<Issn>2008-4560</Issn>
				<Volume>18</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2025</Year>
					<Month>06</Month>
					<Day>22</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Positioning Using Star Images and a Combined Image Processing and Optimization Algorithm</ArticleTitle>
<VernacularTitle>موقعیت‌یابی جغرافیایی با استفاده از تصاویر ستارگان و الگوریتم تلفیقی پردازش تصویر و بهینه‌سازی</VernacularTitle>
			<FirstPage>51</FirstPage>
			<LastPage>69</LastPage>
			<ELocationID EIdType="pii">225097</ELocationID>
			
<ELocationID EIdType="doi">10.22034/jsst.2025.1535</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Amirreza</FirstName>
					<LastName>Kosari</LastName>
<Affiliation>Associate Professor, Faculty of Interdisciplinary Sciences and Technologies, University of Tehran, Tehran, Iran</Affiliation>
<Identifier Source="ORCID">0000-0002-6905-1522</Identifier>

</Author>
<Author>
					<FirstName>Bahador</FirstName>
					<LastName>Abolpour</LastName>
<Affiliation>PhD student, Aerospace Engineering, Kish International Campus, University of Tehran, Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2025</Year>
					<Month>03</Month>
					<Day>05</Day>
				</PubDate>
			</History>
		    <Abstract>The celestial navigation is one of the oldest navigation methods for determining the position, which is done by observing different celestial bodies such as stars. With the advancement of technology and the emergence of accurate imaging sensors, this method has entered a new stage, so that by processing images of stars and analyzing their data, the exact position of an observer can be determined in space or on land. This paper presents a novel method for determining the geographic location of a mobile system using an image of visible stars in the local sky at a specific time. The proposed method does not require any prior knowledge about the observer&#039;s position or orientation. Initially, a grayscale image of the sky is either generated using the Sky Map function in MATLAB, based on the SAO star catalog, or acquired directly from a star sensor. Spatial and frequency-domain features are extracted from the image and compared with features from a set of synthetic sky images corresponding to various geographic locations. A genetic algorithm is employed to optimize the matching process through a tailored fitness function. The key innovation of this research lies in the development of an algorithm capable of accurate localization using only a sky image, without reliance on auxiliary sensors or initial position data. The proposed approach is robust to noise and image rotation and is applicable across the entire Earth&#039;s surface. Simulation results confirm the effectiveness and high accuracy of the method for vision-based autonomous navigation.</Abstract>
			<OtherAbstract Language="FA">ناوبری سماوی یکی از قدیمی‌ترین روش‌های تعیین موقعیت است که با استفاده از مشاهده اجرام سماوی مانند ستارگان انجام می‌شود. با پیشرفت فناوری و ظهور حسگرهای تصویری دقیق، این روش وارد مرحله‌ای نوین شده، به‌طوری‌که می‌توان با پردازش تصاویر ستارگان و تحلیل داده‌های آن‌ها، موقعیت دقیق ناظر را در فضا یا روی زمین تعیین نمود. در این مقاله، یک روش نوین جهت موقعیت‌یابی سامانه‌های متحرک با استفاده از تصاویر ستارگان ارائه شده است. هدف، تعیین مختصات جغرافیایی ناظر در زمانی مشخص و تنها از طریق تحلیل تصویر آسمان قابل رؤیت است؛ به‌گونه‌ای که نیازی به دریافت اطلاعات اولیه از موقعیت یا وضعیت فضایی سامانه نباشد. برای این‌منظور، ابتدا تصویر خاکستری از آسمان با استفاده از تابع Skymap در محیط MATLAB و با بهره‌گیری از داده‌های کاتالوگ ستاره‌ای SAO  تولید شده یا تصویر واقعی ثبت‌شده به‌عنوان ورودی دریافت می‌شود. سپس مجموعه‌ای از ویژگی‌های مکانی و فرکانسی از تصویر استخراج شده و با ویژگی‌های تصاویر سنتز‌شده در نقاط مختلف جغرافیایی مقایسه می‌گردد. در این فرایند، یک الگوریتم بهینه‌سازی ژنتیک برای جست‌وجوی موقعیت با تطبیق تصاویر بر اساس تابع برازش طراحی شده به‌کار گرفته می‌شود. نوآوری اصلی پژوهش حاضر در توسعه الگوریتمی است که موقعیت‌یابی دقیق را تنها بر پایه یک تصویر آسمان و بدون نیاز به سنسورهای کمکی یا اطلاعات اولیه ممکن می‌سازد. روش ارائه‌شده نسبت به چرخش تصویر و نویز مقاوم بوده و قابلیت اجرا بر روی کل سطح زمین را دارد. نتایج شبیه‌سازی کارایی و دقت بالای الگوریتم را در موقعیت‌یابی خودکار مبتنی بر بینایی ماشین نشان می‌دهد.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Positioning</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">image processing</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Genetic Algorithm</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Star image</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://www.jsstpub.com/article_225097_d111d2ba8cc9fa61400dde387cc08a2c.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>ARI, IAS</PublisherName>
				<JournalTitle>Journal of Space Science and Technology</JournalTitle>
				<Issn>2008-4560</Issn>
				<Volume>18</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2025</Year>
					<Month>06</Month>
					<Day>22</Day>
				</PubDate>
			</Journal>
<ArticleTitle>A Fixed-time Stable Output Feedback Non-singular Fast Terminal Sliding Mode Design for Attitude Control of a Rigid Spacecraft Considering External Disturbances and System Uncertainties</ArticleTitle>
<VernacularTitle>طراحی کنترل‌کننده مد لغزشی ترمینالی غیر‌تکین سریع فیدبک خروجی با پایداری زمان ثابت به‌منظور کنترل وضعیت یک فضاپیمای صلب با درنظر گرفتن اثر اغتشاشات خارجی و عدم قطعیت‌های سیستمی</VernacularTitle>
			<FirstPage>70</FirstPage>
			<LastPage>82</LastPage>
			<ELocationID EIdType="pii">225099</ELocationID>
			
<ELocationID EIdType="doi">10.22034/jsst.2025.1538</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Hamed</FirstName>
					<LastName>Soleymani</LastName>
<Affiliation>Ph.D student, Department of Satellite Technology Engineering, Faculty of New Technologies, Iran University of Science and Technology, Tehran, Iran</Affiliation>
<Identifier Source="ORCID">0009-0008-3243-7860</Identifier>

</Author>
<Author>
					<FirstName>Majid</FirstName>
					<LastName>Bakhtiari</LastName>
<Affiliation>Assistant Professor, Department of Satellite Technology Engineering, Faculty of New Technologies, Iran University of Science and Technology, Tehran, Iran</Affiliation>
<Identifier Source="ORCID">0000-0001-6877-0122</Identifier>

</Author>
<Author>
					<FirstName>Jalil</FirstName>
					<LastName>Beyramzad</LastName>
<Affiliation>PhD student,,  Department of Satellite Technology Engineering, Faculty of New Technologies, Iran University of Science and Technology, Tehran, Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2025</Year>
					<Month>03</Month>
					<Day>23</Day>
				</PubDate>
			</History>
		    <Abstract>This study introduces a novel spacecraft attitude control framework designed to operate reliably under uncertainties and external disturbances. At its core lies a dual-component strategy: a controller and a disturbance observer, both engineered for fixed-time convergence. Unlike conventional finite-time methods, where stabilization speed depends on initial conditions, this approach guarantees a preset stabilization window, tunable via controller parameters giving engineers precise command over performance timelines. By modeling spacecraft attitude dynamics using modified Rodriguez parameters (MRP), the system is cast into a second-order nonlinear structure. A non-singular terminal sliding surface is developed to enforce fixed-time convergence, enabling the derivation of robust control inputs. To address real-world unpredictability, a universally robust exact differentiator (URED) observer estimates and neutralizes disturbances within the same fixed timeframe, ensuring seamless compensation. Stability is validated using Lyapunov theory, while comparative simulations against existing methods demonstrate that the proposed framework achieves faster convergence and superior tracking accuracy for both controller and observer. These advancements set it as a promising solution for critical space missions requiring rapid, precise attitude control, such as satellite docking or deep-space exploration.</Abstract>
			<OtherAbstract Language="FA">این پژوهش یک چارچوب نوین برای کنترل وضعیت فضاپیما معرفی می‌کند که با هدف عملکرد پایدار در شرایط عدم قطعیت و اغتشاشات خارجی طراحی شده است. هسته اصلی این سیستم مبتنی بر یک راهبرد دوجزئی شامل یک کنترل‌کننده و یک رویتگر اغتشاشات است که هر دو با الگوریتم‌های همگرایی در زمان ثابت طراحی شده‌اند. برخلاف روش‌های متداول همگرایی در زمان محدود، که سرعت تثبیت به شرایط اولیه وابسته است، این چارچوب تضمین می‌کند سیستم در یک بازه زمانی ازپیش‌تنظیم‌شده تثبیت می‌شود. این بازه با تنظیم پارامترهای کنترل‌کننده، امکان مدیریت دقیق زمانبندی عملکرد را فراهم می‌سازد. دینامیک وضعیت فضاپیما با استفاده از پارامترهای رودریگز اصلاح‌شده به عنوان یک ساختار غیرخطی مرتبه دوم مدل‌سازی شده است. برای تحقق همگرایی در زمان ثابت و استخراج ورودی‌های کنترلی مقاوم، یک سطح لغزش ترمینال غیرتکین توسعه یافته است که از مشکلات تکینی در روش‌های مرسوم اجتناب می‌کند. برای مقابله با عدم قطعیت‌های دنیای واقعی، یک رویتگر مشتق‌گیر دقیق و مقاوم جهانی طراحی شده که اغتشاشات را در همان بازه زمانی ثابت تخمین زده و خنثی می‌کند و جبران‌سازی بی‌وقفه را ممکن می‌سازد. پایداری سیستم با استفاده از نظریه لیاپانوف به‌صورت تحلیلی تأیید شده است. شبیه‌سازی‌های مقایسه‌ای با روش‌های موجود نشان می‌دهد چارچوب پیشنهادی به همگرایی سریعتر و دقت ردیابی بالاتر در هر دو بخش کنترل‌کننده و رویتگر دست می‌یابد. این پیشرفت‌ها، این سیستم را به عنوان راهکاری امیدوارکننده برای مأموریت‌های حیاتی فضایی نظیر اتصال ماهواره‌ها، کنترل وضعیت در مدارهای پیچیده، و اکتشافات اعماق فضا مطرح می‌کند که نیازمند واکنش‌های سریع، دقت فوق‌العاده و مطمئن هستند.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Spacecraft</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Universally robust exact differentiator (URED) observer</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Attitude control</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Fixed time stable</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">nonsingular terminal sliding mode</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://www.jsstpub.com/article_225099_7e608d63a006c83241f4f05d3d2d9d33.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>ARI, IAS</PublisherName>
				<JournalTitle>Journal of Space Science and Technology</JournalTitle>
				<Issn>2008-4560</Issn>
				<Volume>18</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2025</Year>
					<Month>06</Month>
					<Day>22</Day>
				</PubDate>
			</Journal>
<ArticleTitle>A Review on Underactuated Attitude Control of Reaction Wheel Actuated Satellites</ArticleTitle>
<VernacularTitle>مروری بر کنترل وضعیت زیرتحریک ماهواره های تحریک شده با چرخ عکس العملی</VernacularTitle>
			<FirstPage>83</FirstPage>
			<LastPage>119</LastPage>
			<ELocationID EIdType="pii">219075</ELocationID>
			
<ELocationID EIdType="doi">10.22034/jsst.2025.1528</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Mohammad</FirstName>
					<LastName>Zarourati</LastName>
<Affiliation>PhD, Faculty of Aerospace Engineering, K. N. Toosi University of Technology, Tehran, Iran</Affiliation>
<Identifier Source="ORCID">0000-0002-0413-2786</Identifier>

</Author>
<Author>
					<FirstName>Mehran</FirstName>
					<LastName>Mirshams</LastName>
<Affiliation>Associate Professor, Faculty of Aerospace Engineering, K. N. Toosi University of Technology, Tehran, Iran</Affiliation>
<Identifier Source="ORCID">0000-0003-2323-4662</Identifier>

</Author>
<Author>
					<FirstName>Morteza</FirstName>
					<LastName>Tayefi</LastName>
<Affiliation>Assistant Professor, Faculty of Aerospace Engineering, K. N. Toosi University of Technology, Tehran, Iran</Affiliation>
<Identifier Source="ORCID">0000-0002-2773-2493</Identifier>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2025</Year>
					<Month>01</Month>
					<Day>27</Day>
				</PubDate>
			</History>
		    <Abstract>The attitude determination and control subsystem is a vital satellite subsystem that provides maneuvering and pointing. According to statistics, more than half of the launched small satellites use the reaction wheel as the principal executive mechanism to complete the attitude maneuvering task. The underactuated technical term describes systems with fewer actuators than the degrees of freedom. Construction constraints and actuator failures can result in an underactuated system. Underactuation of a satellite under operating conditions can reduce its in-orbit performance and cause mission failure. This paper first introduces an underactuated satellite and reviews satellite attitude control methods in healthy conditions. The following presents fault-tolerant control and various mechanisms for identifying underactuated conditions. Model-based methods effectively diagnose underactuated conditions as they align well with fault compensation control techniques and perform efficiently across all satellite operating conditions. Also, most of the works are focused on the observer. In addition, methods used to stabilize and control an underactuated satellite using a reaction wheel actuator are investigated. Finally, attitude tracking control in underactuated conditions is presented.</Abstract>
			<OtherAbstract Language="FA">زیرسیستم تعیین و کنترل وضعیت یکی از زیرسیستم های حیاتی ماهواره است که امکان انجام مانور و نشانه روی را فراهم می کند. طبق آمار، بیش از نیمی از ماهواره های کوچک پرتاب شده، از چرخ عکس العملی به عنوان عملگر روی برد برای تکمیل وظیفه ی مانور وضعیت استفاده می کنند. اصطلاح فنی زیرتحریک برای توصیف سیستم هایی که تعداد عملگر کمتری نسبت به درجات آزادی خود دارند، استفاده می شود. محدودیت های ساختاری و خرابی عملگر، می توانند منجر به یک سیستم زیرتحریک شوند. زیرتحریک شدن ماهواره در یک شرایط عملیاتی می تواند عملکرد روی مدار آن را کاهش داده و باعث شکست در مأموریت شود. در این مقاله ابتدا ماهواره ی زیرتحریک معرفی شده و مروری بر روش های کنترل وضعیت ماهواره در شرایط سالم شده است. در ادامه کنترل تحمل پذیر عیب و انواع مکانیزم های شناسایی شرایط زیرتحریک ارائه می شوند. ﺍﺳﺘﻔﺎﺩﻩ ﺍﺯ ﺭﻭﺵﻫﺎﻱ ﻣﺒﺘﻨﻲ ﺑﺮ ﻣـﺪﻝ به دلیل تناسب با تکنیک های کنترلی جبران سازی عیب و کارآیی در تمامی شرایط عملیاتی ماهواره، جهت تشخیص شرایط زیرتحریک مناسب است. همچنین عمده کارهای ﺻﻮﺭﺕ ﮔﺮﻓﺘﻪ ﻣﺘﻤﺮﮐﺰ ﺑﺮ مشاهده گر ﺍﺳﺖ. همچنین روش هایی که به منظور پایداری و کنترل یک ماهواره زیرتحریک با استفاده از عملگر چرخ عکس العملی به کار رفته اند، بررسی می شود. در انتها نیز کنترل تعقیب وضعیت در شرایط زیرتحریک آمده است.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Attitude control</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Underactuated satellite</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Reaction wheel</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Fault-tolerant control</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Underactuated attitude control</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://www.jsstpub.com/article_219075_df52be7a71de5d8448f2caba38504ec9.pdf</ArchiveCopySource>
</Article>
</ArticleSet>
