<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ArticleSet PUBLIC "-//NLM//DTD PubMed 2.7//EN" "https://dtd.nlm.nih.gov/ncbi/pubmed/in/PubMed.dtd">
<ArticleSet>
<Article>
<Journal>
				<PublisherName>ARI, IAS</PublisherName>
				<JournalTitle>Journal of Space Science and Technology</JournalTitle>
				<Issn>2008-4560</Issn>
				<Volume>18</Volume>
				<Issue>3</Issue>
				<PubDate PubStatus="epublish">
					<Year>2025</Year>
					<Month>09</Month>
					<Day>23</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Evaluation of Different Welding Processes for Bonding Tethered Balloon Fabric</ArticleTitle>
<VernacularTitle>ارزیابی فرایندهای مختلف جوشکاری برای اتصال پارچه بالن مقید</VernacularTitle>
			<FirstPage>28</FirstPage>
			<LastPage>37</LastPage>
			<ELocationID EIdType="pii">230771</ELocationID>
			
<ELocationID EIdType="doi">10.22034/jsst.2025.524369.1547</ELocationID>
			
			<Language>EN</Language>
<AuthorList>
<Author>
					<FirstName>Maedeh Sadat</FirstName>
					<LastName>Zoei</LastName>
<Affiliation>Assistant Professor, Institute of Materials and Energy, Iranian Space Research Center, Isfahan, Iran</Affiliation>
<Identifier Source="ORCID">0000-0002-4940-6592</Identifier>

</Author>
<Author>
					<FirstName>Mohammad Reza</FirstName>
					<LastName>Pakmanesh</LastName>
<Affiliation>Assistant Professor, Institute of Materials and Energy, Iranian Space Research Center, Isfahan, Iran</Affiliation>
<Identifier Source="ORCID">0000-0002-6129-4714</Identifier>

</Author>
<Author>
					<FirstName>Saeed</FirstName>
					<LastName>Asghari</LastName>
<Affiliation>Associate Professor, Institute of Materials and Energy, Iranian Space Research Center, Isfahan, Iran</Affiliation>
<Identifier Source="ORCID">0000-0001-9073-8161</Identifier>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2025</Year>
					<Month>05</Month>
					<Day>18</Day>
				</PubDate>
			</History>
		    <Abstract>Nowadays, the use of tethered balloons in telecommunication applications has increased significantly. Due to their large dimensions and area, the tethered balloon structure hull is made of several sections that are bonded to each other by various joining processes. In this study, the application of various welding processes for the hull fabric of a tethered telecommunication balloon according to mission requirements was investigated. For this purpose, laboratory samples of polyester substrate fabric with double-sided PU+PVC coating, polyester substrate fabric with single-sided PVC coating, and polyester substrate fabric and TPU laminate were prepared and the fabric joining in these samples was carried out by high-frequency welding equipment, ultrasonic stitching, and thermal welding. Then, the tensile strength and helium permeability of the joining samples were measured. The results showed that the application of the welding process by ultrasonic sewing equipment and high-frequency spot welding resulted in a significant reduction in the strength of the joint seam compared to the unbonded fabric for three fabrics types. However, in the hot air thermal welding process of PVC-coated polyester fabric, the tensile strength and helium permeability at the joint seam under the condition of using the welding tape are respectively equal to 1.465 N and 0.06 L/m2/day, which is in accordance with the relevant requirement (500 N and 0.5 L/m2/day) and close to the similar values in the unbonded fabric (6.473 N and 0.05 L/m2/day). Therefore, the hot air thermal welding process is a appropriate process for bonding PVC-coated polyester fabric applied in this research.</Abstract>
			<OtherAbstract Language="FA">امروزه استفاده از بالن­‌های مقید در کاربردهای مخابراتی افزایش قابل توجه­‌ای داشته است. بدنه سازه بالن مقید به دلیل ابعاد و مساحت بزرگ، از چندین قطاع ساخته می­‌شود که توسط فرایندهای مختلف اتصال به یکدیگر متصل می­‌شوند. فرایند اتصال به اندازه توسعه مواد سازه دارای اهمیت است. در این مطالعه به بررسی کاربرد فرایندهای مختلف جوشکاری برای پارچه بدنه بالن مقید مخابراتی منطبق بر الزامات ماموریتی پرداخته شده ­است. بدین‌منظور نمونه­‌های آزمایشگاهی از پارچه زیرلایه پلی ­استر با پوشش دو طرفه PU+PVC، پارچه زیرلایه پلی­‌استر با پوشش یک طرفه PVC و پارچه زیرلایه پلی‌­استر و لمینت TPU آماده گردید و اتصال پارچه در این نمونه­‌ها توسط تجهیز جوشکاری فرکانس بالا با هد نقطه­‌ای، دوخت اولتراسونیک و جوشکاری حرارتی صورت گرفت. سپس استحکام کششی و نفوذپذیری هلیوم نمونه­‌های اتصال اندازه­‌گیری شد. نتایج نشان داد کاربرد فرایند جوشکاری توسط تجهیز دوخت اولتراسونیک و جوشکاری فرکانس بالا با هد نقطه‌­ای برای هر سه نوع پارچه به­‌کار رفته، موجب کاهش قابل توجه استحکام درز اتصال در مقایسه با پارچه بدون اتصال می­شود. اما در فرایند جوشکاری حرارتی هوای داغ پارچه پلی­استر با پوشش PVC، مقدار استحکام کششی و نفوذپذیری پارچه در برابر هلیوم در درز اتصال در شرایط کاربرد نوار جوش به­ترتیب برابر با N 1/465 و L/m2/day 06/0 است که مطابق با الزام مربوطه (N 500 و L/m2/day 5/0) و نزدیک به مقادیر مشابه در پارچه اولیه بدون اتصال (N 6/473 و L/m2/day 05/0) است. بنابراین فرایند اتصال جوشکاری حرارتی با هوای داغ، فرایندی مناسب برای اتصال پارچه پلی­استر با پوشش PVC  کاربردی در این تحقیق می­‌باشد.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Tethered Balloon</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Welding process</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Bond strength</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Helium permeability</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">PVC-coated polyester fabric</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://www.jsstpub.com/article_230771_950e35a2244603c495d408e849d3e1cf.pdf</ArchiveCopySource>
</Article>
</ArticleSet>
